DIY Home Improvement : How to Replace A Window Screen

THINGS YOU SHOULD CONSIDER :

  1. Before removing the old screen, you should do the following:
    Measure the opening the screen covered.
  2. Add a minimum of 2 inches (50.8 mm)on each side. This is 4 inches (101.6 mm) to the width and length of each area.
  3. If replacing more than 1 screen: Find out the width of screens available at your local hardware/home improvement store.
  4. Make a layout, insuring that your measurements fit inside the width of screen available, including the added 4 inches (101.6 mm).
  5. Add an extra 4 to 6 inches (101.6 mm to 152.4)to the length of the screen for safety.

1 comment:

Anonymous said...

Capital Steel Industries

Capital Steel Buildings are used to satisfy a wide variety of commercial and agricultural needs.

Consider the versatility of a Capital Steel Building!

Capital Steel Industries

The Possibilities are Unlimited With a Little Imagniation & the Right Components.

FEATURES:
All Drawings and Anchor Bolt Plans Engineer Certified.
50,000 PSI High Strength Plate.
Submerged Arc/Welded Frames.

Factory Primed Frames.
80,000 PSI Galvalume Roof Sheeting.
Solid Built-up Main Frame Construction.
Industry Standard A-325 Structural Bolts.
Deluxe Architectural Trim Package.
Pre-punched Components.
Corrugated Ridge Caps.
Standing Seam Roofs.
American Made Components.

BENEFITS:
Attractive and Functional Design with choice of Panel
and Trim Colors.
Brick, Decorative Block, Stone or Stucco Elevations.
20 year Limited Warranty on Metal Systems.
Unlimited Designs.
Eave Heights Available to Accommodate a Wide Variety of
Needs.

Open Clear Span Frame up to 300 Feet Wide.
Easily Expanded to Grow with your Needs.
Low Lifetime Maintenance.
Non-Combustible.
Fast and Convenient Delivery.
Fast Completion.